Photographing artworks: how to get good photos of your work

You want photos that show your work, not the light in your studio. You do not need a studio for that. You need even light from the side, a camera that faces the work squarely, and a fixed routine. The photo is step 6 in the guide How to start an artwork catalogue.

Updated 17 October 2026.

What makes a good photo of a work

A good photo of a work has five features, and you can check each one on screen. The whole work is visible, with a little space around the edges. The edges are straight, so the picture is not narrower at the top than at the bottom. The corners are as bright as the centre. Nothing reflects: there is no bright spot and no shiny streak on the paint. And the colours are right, so a neutral grey patch also looks grey in the photo.

Archives use the same measure for even light. US libraries and archives work to the FADGI guidelines, a rulebook their federal agencies wrote for photographing cultural heritage. Ideally, they say, a neutral surface should be recorded evenly from the centre to the edge (source 1).

Three set-ups compared

All three set-ups follow the same rule. The light comes at an angle from the side, never from the camera. The surface then throws the light off to the side instead of into the lens.

Set-upWhen it fitsWhat you needCost (estimate)
Daylight at a windowsmall works and works on paper, on days without sun in the windowwindow, white card as a reflector, tripod, grey card0 to 60 euros
Two lamps at 45 degreeslarge works, any time, the same result every timetwo identical LED lamps on stands, tripod, grey card, a darkened room150 to 400 euros
Overcast sky outdoorslarge works when you have no lampsthick cloud or the shadow of a house wall, easel, tripod, grey card0 to 60 euros

The costs are estimates without a price source, as of October 2026. If you already own a tripod or lamps, that part costs nothing. A grey card is a card in neutral grey. It is your colour reference. The camera sets its white balance from it, the setting that keeps grey free of any colour cast.

At the window, place the work at a right angle to the window, so the light falls across it from the side. The white card on the other side brightens the darker half. Check in the photo whether one side is brighter.

With two lamps, put one lamp on the left and one on the right. Both are the same distance from the work and point at its centre at about 45 degrees. Switch off every other light in the room, including the ceiling light. Two kinds of light at once cause a colour cast that is hard to remove later. How to set the angles exactly is shown in Photographing paintings without glare.

When you buy lamps, look at the colour rendering index. It is printed on the box as CRI or Ra and tells you how true colours look under the lamp. The maximum is 100. Archives consider a value above 90 suitable (source 1).

Outdoors you need a closed layer of cloud. The light then comes from everywhere and casts hardly any shadow. Direct sun is too harsh and too warm.

How a shoot works

  1. The work hangs straight, with its centre at camera height. The camera is on the tripod, parallel to the work.
  2. Step back a little and zoom in slightly. If you stand close and zoom all the way out, the edges bulge outwards in the photo.
  3. In the first photo, the grey card hangs next to the work. Set the white balance on it. As long as the light and camera stay the same, it holds for every further photo. Archives go further. They place a small card with grey and colour patches in every capture and crop it out afterwards (source 1).
  4. Set the brightness so that the brightest part of the work still shows texture and is not pure white. Then photograph the front and the further views from the table below.
  5. Name the files right after the shoot. Each file name starts with the inventory number.

A phone works too. Put it on a tripod with a phone holder and tap the grey card, so that brightness and colour are measured there. Turn the flash off.

Checklist before saving

Look at every photo at full size before you file it.

  • All edges are visible, and they run parallel to the frame.
  • No bright spot or streak shines anywhere.
  • The corners are as bright as the centre, and in the first photo the grey card looks neutral grey.
  • The brightest part still shows texture and is not pure white.
  • The photo is sharp, including the corners.
  • The file name starts with the inventory number, and a second copy is stored somewhere else.

If one point fails, take the photo again. A reflection covers the paint beneath it, and no software knows what the paint looked like there.

Which views each type of work needs

A view is one photo of a work from a particular angle. The front matters most, but it is rarely the only one.

Type of workViews
Paintingfront with all edges, back with signature and number, detail of the paint, installation view
Work on paperfront without glass, back, detail of the signature
Sculpturefront, right, back and left at the same height, underside with label, detail
Installationinstallation view from two directions, details of the parts
Print from an editionfront, detail of the number such as 3/20, back

An installation view shows the work on a wall or in a room, so viewers can judge its size. The photo of the back later helps to prove authenticity. What else you need for that is covered in Issuing a certificate of authenticity: what goes in it.

Naming and keeping the files

Every file name starts with the inventory number, followed by the view. An example for work 2026-0014:

2026-0014_front.jpg
2026-0014_back.jpg
2026-0014_detail-01.jpg
2026-0014_installation.jpg

Use only letters without accents, digits, hyphens and underscores. Many programs and websites replace spaces and accented letters. The inventory number does not belong only in the file name, though. It also goes in the catalogue and on the work. How to assign it is explained in Numbering your works: a system that lasts.

Keep the original of every photo at full size. A website only needs smaller copies, but a catalogue or a print needs the original. If you publish photos of your work or hire a photographer, you should know the rights involved. They are covered in May you photograph artworks and publish the photos?

Photos of your work in Kolopheo

In Kolopheo every work has a main image. With "Add view" you add a detail, an installation view or the back. For each view you choose whether it appears publicly on your website or stays internal. The back is set to internal by default. Internal views never appear in public, not even through a direct link. For the website, Kolopheo creates smaller versions of the main image in three widths.

A folder of work photos uploaded to Kolopheo. Title, year, medium and size come from the file name.

There are three limits you should know. First, Kolopheo scales every main image down to at most 4000 pixels on the long side when you upload it, and saves it again. So keep the full-size original yourself. Second, Kolopheo replaces every character in the file name except letters, digits, hyphens and underscores with an underscore. Third, Kolopheo reads a year at the start of the file name as the year of the work. It does so when the camera data in the image holds no year. Inventory number 2026-0019 starts with the year the picture entered the catalogue. It was painted around 2010, though. Kolopheo still enters 2026, so check the year and the title after uploading. More under For artists.

Sources

  1. Federal Agencies Digital Guidelines Initiative (FADGI), "Technical Guidelines for Digitizing Cultural Heritage Materials", Third Edition, retrieved 17 October 2026: https://www.digitizationguidelines.gov/guidelines/FADGITechnicalGuidelinesforDigitizingCulturalHeritageMaterials_ThirdEdition_05092023.pdf